Tranquil Flame Air Humidifer
Apply discount code at checkout
- Fill the water tank with water, making sure not to exceed the water mark.
- Add an appropriate amount of non-corrosive essential oil to the water tank.
- Briefly press the atomization switch button to start the aromatherapy atomization.
- To stop the atomization, briefly press the atomization switch button again.
- Briefly press the light switch button to turn on the flame atmosphere light.
- To increase the brightness of the flame atmosphere light by 30%, press and hold the light switch button.
- To turn off the flame atmosphere light, briefly press the light switch button again.
- 1 Humidifier Diffuser
- 1 USB Cable
- 1 User Manual
The dimensions of the product are 178x80x108mm/7.01x3.15x4.25inch.
Spray quantity: 15-20ml/h
Rated Input: DC 5V/2A
Humidification Method: Ultrasonic
Power (W): 2W
Voltage (V): 24V
- This is a diffuser and can be used with non-corrosive essential oils, no cotton swabs are needed.
- Use a 5V2A adapter for power supply to avoid circuit damage.
- Do not exceed the MAX water line and avoid getting water in the ventilation duct.
If Product Isn't Working
Diffuser: Use correct adapter (usually 5V2A or 12V, 24V) and keep water below the water level line. Avoid water entering the vent.
Humidifier: Ensure cotton swab is wet and pressed against the lower end of the atomizing sheet inside the cover.